AirsoftGuns s.r.o.
ZB vz. 26, AY
Automatic electric airsoft gun (AEG). Replica of Czechoslovak light machine gun ZB (Zbrojovka Brno) model 26Includes a charger, battery 9.6V/1100mAh (small connector) and Wind Up Hi-cap Magazine 500 rounds of BBs.
Recommended airsoft accessories, parameters, review and other useful information about the product ZB vz. 26, AY can be found in the bookmarks.
| - notice - | Battery and charger are included. |
|---|---|
| AEG Variant (EBB/NBB) | NBB |
| Approximate Range | 55 m |
| Bearings | 7 mm, bushing, metal |
| BlowBack | No |
| Caliber | 6 mm |
| Connector Type | Tamiya Mini |
| Fire Mode | safe/full-auto |
| Gearbox Version | metal version ZB26 |
| Gun Length | 1170 mm |
| Gun Weight | 6,40 kg |
| Hop-Up Perform | adjustable hop-up |
| Inner Barrel Length | 570 mm |
| Magazine (Lowcap/Midcap/Hicap/Xhicap) | hi-cap |
| Magazine Capacity | 500 BB |
| Motor Type | Short torque |
| Motor Variant | Short |
| Muzzle velocity specified by manufacturer | 100 m/s [328 fps] |
| Muzzle velocity the measured | 110 m/s [361 fps] |
| Recommended Batteries | Type CQB (9.6V, 2000mAh) |
| Recommended BBs | 0.23 - 0.25 g |
Jedinečná zbraň pro nadšence. Zpracování není, jak bych si představoval. Mířidla pro přímou střelbu nejsou moc použitelná, leda až pro střelbu obloukem. Pojistka hlavně se po lehkém zavadění odjistí a následně vypadává hlaveň, což je ve hře špatné, naštěstí stačí přetáhnout gumičkou. Botka nedrží, vypadává, musí se hned vypodložit. Kabeláž je neforemná na malé místo v pažbě, kam se přiložená baterie tak tak vleze. Vůle mezi spoji jednotlivých částí zbraně odpovíá čínské produkci. V nožkách je taktéž vůle, která občas zamezuje snadnému scvaknutí jednou rukou. Střelecký výkon je v porovnání s jinými zbraněmi průměrný, chtělo by to upgrade, ale mechabox se mi jeví, tak že by to nemusel vydržet (můj osobní nepoložený názor). Po natažení zásobníku vydrží střílet dosti dlouho, pro podpůrnou zbraň ideální. Jedna věc mi na zbrani chybí a tou je ražení. Bez něj je telo zbraně "holé".
I was badly surprised when I opened the box because the first I saw was the wooden stock broken at joining end. The second was the rattling barrel. After opening the cover for the magazine, I saw that the inner barrel was not secured. In the receiver there are two lateral lugs for mounting the hop-hop unit. But these lugs had no holes. So I drilled holes and made threads. But after mounting the hop-up unit I found that the rear end of the inner barrel was slightly curved upwards. So I had to made some small thin plates and insert them between the hop-up and the lugs. The diameter of the rear end of the gas tube was too small and I applied insulation tape. So the rattling was fixed. I glued the broken parts of the stock and reinforced it from inside using mix of glue and wood powder. But I am not sure how long it will serve. The battery was not charged, so after six hours of charging I could try the operation of the gearbox. No problems were found. Still I have not tested the gun at big distance, only in home. I don't know what is the muzzle energy, it seems to be above 1 Joule. Overall the machine gun has good look, enough weight and sounds well when is shooting.
Very good product! I gave 4 stars, not 5, because the buttstock is a bit fragile.