Spring SS, 52mm, AEG, AirsoftGuns

Spring SS, 52mm, AEG, AirsoftGuns. SuperSpring (SS) length 52 mm is mainly for using in most of AEG guns with standard length of piston (e.g. M4/M16, AK, G36, M14, MP5 etc.). Upgrade part from series AirsoftGuns Custom Parts. Spring is made from the highest quality Japanese spring wire VDSiCr for direct requests of service technicians from AirsoftGuns. We took advantage of our many years experiences with upgrade of airsoft guns. We used knowledge gained during work on tens of thousands of service orders. We have created a new product line named AirsoftGuns Custom Parts, where you can find the best parts for airsoft guns upgrade.

SuperSpring (SS) is practically the hardest possible version of airsoft spring, which is in dimension for mentioned gun model. To achieve greater flexibility and correct returning back to start position we don't use progression winding. Complete spring preload (spaces between each eyes) is set to lowest possible exceed value of the Tau. It determines quality of springs - mainly stability and flexibility for long time. With extreme high value of Tau and rapid weakening/squeezing airsoft springs we unfortunately meet every day during airsoft guns upgrade.

If you want a maximum power of your gun, you have met with many variations of airsoft springs. Unfortunately, not all have the ideal length, hardness or durability for certain type of gun, and therefore can not be used their full potential. Our tuned springs from high quality wire are offered in different lengths (after full pressing), so everyone can choose the most suitable option. Someone uses long spring with the largest number of working eyes without axial bearings in the piston and spring guide, another has QSC rotary spring guide and will need shorter spring.

length after full pressing: 52 mm
wire diameter: 1.90 mm
outer diameter: 14 mm
material: VDSiCr
number of turns: 27

Overview table produced variants of SuperSprings (SS):

Number of turns a length after full pressing	SVD Dragunov spring powered	M16 AEG	SR25 AEG	VSR Bore Up spring powered
44 turns, 85 mm	-	-	-	230 m/s 755 fps
39 turns, 75 mm	215 m/s (shim 7 mm) 705 fps	-	215 m/s 705 fps	-
36 turns, 69 mm	200 m/s (shim 7 mm) 656 fps	-	200 m/s 656 fps	-
33 turns, 63 mm	190 m/s (shim 15 mm) 623 fps	205 m/s 673 fps	185 m/s 607 fps	-
30 turns, 58 mm	-	200 m/s 656 fps	-	-
27 turns, 52 mm	-	185 m/s 607 fps	-	-

Note: The values were measured at the guns that were upgraded by technicians of AirsoftGuns service department. To achieve the same performance, it is necessary to use quality upgrade parts and is necessary correct and professional installation too. If you're interested in quality upgrade of your airsoft guns, you can contact directly our service department.

If you want to know more how is it with power of springs, we recommend an interesting article about real hardness of airsoft springs and how to mesure them. There you can learn that it is not good to believe label on the packaging of the spring, because the absence of common standards allows manufacturers to mark the spring hardness quite different. It is important to say that the measurement of hardness with our measuring rod can be used only with springs which have the total number of turns about 29 - 32. If is spring out of interval the measuring will be incorrect. It is better to use "weight" method of full pressed spring.

Recommended airsoft accessories, parameters, review and other useful information about the product Spring SS, 52mm, AEG, AirsoftGuns can be found in the bookmarks.