MOS FET on the switch contacts, mech v. 2, JeffTron

MOS FET on the switch contacts, mech v. 2, JeffTron. Professionally made mosfet, without wiring, designed for airsoft electric guns (AEG). It is fully integrated inside the gearbox version 2 instead of the original trigger contacts, compatible with Tokyo Marui standard. The device completely eliminates unwanted sheet metal burning, increases gun rate of fire and battery holds longer, than with basic wiring. For most commonly available and widespread brands, these mosfet switching contacts can be installed without any modifications.

SPECIFICATIONS:
- Mosfet build on trigger contacts from SHS company
- Easy installation inside the gearbox version 2
- Devices without wires, you can use max. 1,5qmm (AWG16) power wires and 0,5qmm (AWG20) signal wires
- Suitable for service center, if you are not familiar with soldering to the circuit board, choose device with wiring and accessories
- Designed for spring up to M170 (equivalent for current 90A single shot fire or 35A Burst fire for max. 30s). For higher load please use Mosfet II (it is outside gearbox)
- Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V)
- No current consumption in the idle mode
- No sparking on switch contacts
- In auto fire mode piston stops in random position due the mechabox design
- For right function is necessary to have a functional gearbox cut off lever, selector plate, reverse latch, trigger and trigger block, as it has the standard gearbox

PACKAGE INCLUDES:
- Mosfet on trigger contacts
- Trigger switch
- Screw for screw to keep device in the position
- Installation manual in English

SAFETY WARNING:
- Installation of this device into the gearbox requires advanced technician skills!
- Please read these informations before installing your device to prevent any damage.
- Short circuit or incorrectly connected battery will cause immediate damage to the device which is not covered by the warranty. It can lead to fire or even battery explosion.
- Disconnect battery, when you aren't using the gun! Otherwise you will fully discharge the battery. Because the device drains small amount of current from the bettery all the time.
- Do not connect battery when gun pointing towards you, another person or an animal.
- Do not modify, repair and put into any kind of liquids or thermal shock.
- Never use a transformer soldering iron!
- Despite our best efforts, we cannot guarantee 100% device compatibility with all version 2 gearboxes.

Recommended airsoft accessories, parameters, review and other useful information about the product MOS FET on the switch contacts, mech v. 2, JeffTron can be found in the bookmarks.