AirsoftGuns s.r.o.
Full gearbox v. 2, M16, 150m/s, rear wire, AirsoftGuns
Professionally assembled complete gearbox v. 2 for M16 type of weapons with performance up to 150 m/s. Reinforced gearbox is designed for guns series M16/M4/M15 to the barrel longer than 400 mm and rear cable outlet into the stock. This is not a standard serial production in China or Taiwan, where it is not possible to devote so much time and care. Upgrade was provided by our company, which has more than ten years of experience and tens of thousands of satisfied customers.
Full gearbox v. 2, M16, 150m/s, rear wire, AirsoftGuns. Professionally assembled complete gearbox v. 2 for M16 type of weapons with performance up to 150 m/s. Reinforced gearbox is designed for guns series M16/M4/M15 with barrel longer than 400 mm and rear cable outlet into the stock. This is not a standard serial production in China or Taiwan, where it is not possible to devote so much time and care. Upgrade was provided by our company, which has more than ten years of experience and plenty of satisfied customers.
gearbox was fitted with all necessary components with regard to good durability, overall function and the best price/performance ratio. For the vast majority favourite parts available from SHS were used, which has become a world leader in AEG upgrades. The following components were used...
Complete cylinder set from the SHS:
CNC metal piston head with the bearing
SHS metal cylinder head M4
Polished stainless steel cylinder M16
Aluminum nozzle M16/M4 - 21.5 mm
Stress parts from SHS:
Precise piston with steel teeth
Set of gears Helical - super load (100:300)
Rotary spring guide for the gearbox v. 2
Metal oilless bushings 7 mm
SHS latch reverse - in. 2, 3
Performance parts from the SHS:
Spring M130
And the other:
7 mm reinforced gearbox v. 2 from SHS - (Zamak)
Delayer clip SHS
Tappet plate SHS -V.2
Trigger M16/M4
Mechanical safety lever M16/M4
Selector plate for M16/M4
SHS a set of springs for the gearbox v. 2
Switch contacts SHS -V.2
Gilded T-Dean connector
Universal MOS FET switching set - type standard
Metal reinforced gearbox was fitted as standard, which is intended to prevent premature rupture of the gearbox. This problem is frequent for homemade upgrade and upgraded weapons mass-produced in China or Taiwan and with strong spring. Gearbox is fitted with a spring M130 and air-conditioning can inflict upon proper exchange achieve an output of up to 150 m/s. We recommend the installation to be done by experienced and professional fitters. In case of bad and amateur installation it may not provide good alignment and consequently may be a problem with the performance or the overall function of the weapon. The entire set is luxuriously equipped with low resistance cabling and silicone MOS FET switch which is absolutely necessary with strong springs, but often it is underrated by manufactures and sellers.
Recommended airsoft accessories, parameters, review and other useful information about the product Full gearbox v. 2, M16, 150m/s, rear wire, AirsoftGuns can be found in the bookmarks.
gearbox was fitted with all necessary components with regard to good durability, overall function and the best price/performance ratio. For the vast majority favourite parts available from SHS were used, which has become a world leader in AEG upgrades. The following components were used...
Complete cylinder set from the SHS:
CNC metal piston head with the bearing
SHS metal cylinder head M4
Polished stainless steel cylinder M16
Aluminum nozzle M16/M4 - 21.5 mm
Stress parts from SHS:
Precise piston with steel teeth
Set of gears Helical - super load (100:300)
Rotary spring guide for the gearbox v. 2
Metal oilless bushings 7 mm
SHS latch reverse - in. 2, 3
Performance parts from the SHS:
Spring M130
And the other:
7 mm reinforced gearbox v. 2 from SHS - (Zamak)
Delayer clip SHS
Tappet plate SHS -V.2
Trigger M16/M4
Mechanical safety lever M16/M4
Selector plate for M16/M4
SHS a set of springs for the gearbox v. 2
Switch contacts SHS -V.2
Gilded T-Dean connector
Universal MOS FET switching set - type standard
Metal reinforced gearbox was fitted as standard, which is intended to prevent premature rupture of the gearbox. This problem is frequent for homemade upgrade and upgraded weapons mass-produced in China or Taiwan and with strong spring. Gearbox is fitted with a spring M130 and air-conditioning can inflict upon proper exchange achieve an output of up to 150 m/s. We recommend the installation to be done by experienced and professional fitters. In case of bad and amateur installation it may not provide good alignment and consequently may be a problem with the performance or the overall function of the weapon. The entire set is luxuriously equipped with low resistance cabling and silicone MOS FET switch which is absolutely necessary with strong springs, but often it is underrated by manufactures and sellers.
Recommended airsoft accessories, parameters, review and other useful information about the product Full gearbox v. 2, M16, 150m/s, rear wire, AirsoftGuns can be found in the bookmarks.
