AirsoftGuns s.r.o.
Battery, AEP, Li-Pol, 7.4V, 550mAh, 20C, StormPower
AEP Li-Pol battery 7.4V / 550 mAh (20C) battery from StormPower. High quality Li-Pol battery with high discharge current (up to 30C at peak) with best price/performance ratio. Maximum long-term discharge current 11A. Dimensions (mm): 81 x 19 x 12. Lithium polymer (Li-Pol) accumulators represent the most modern energy source. They excel especially with low weight (30g) and excellent discharging characteristics. Thanks to its parameters and small dimensions, it replaces obsolete NiCd and NiMH accumulators in electric guns - AEP. With this battery, you'll get better cadence for the gun, faster trigger response, and a larger number of shots.
Battery, AEP, Li-Pol, 7.4V, 550mAh, 20C, StormPower. AEP Li-Pol battery 7.4V / 550 mAh (20C) battery from StormPower. High quality Li-Pol battery with high discharge current (up to 30C at peak) with best price/performance ratio. Maximum long-term discharge current 11A. Dimensions (mm): 81 x 19 x 12.
Lithium polymer (Li-Pol) accumulators represent the most modern energy source. They excel especially with low weight (30g) and excellent discharging characteristics. Because of a completely different type of electrochemical reaction, ongoing inside the cells require a completely different treatment than conventional NiCd or NiMH accumulators.
Thanks to its parameters and small dimensions, it replaces obsolete NiCd and NiMH accumulators in electric guns - AEP. With this battery, you'll get better cadence for the gun, faster trigger response, and a larger number of shots.
The nominal voltage of the Li-Pol cell is 3.7V (as opposed to 1.2V for NiCd and NiMH batteries). In operation, cell voltage must not exceed 4.2V when charging and falls below 3V. Exceeding these values means that the battery is irreversibly damaged. In normal operation, the no-load voltage (before charging the battery) shouldn't drop below 3.5V. If you find lower voltages before charging, you discharge the batteries excessively.
Becouse of that you need to use for charging by special charger for Li-Pol batteries. It is also recommended to use a special Li-Pol alarm circuit that alerts you to a critical discharge of the battery.BR>
Protect cells from mechanical damage - trance electrodes puncture. This could result in an internal short circuit with explosion and fire. Don't pierce "inflated" cells - inflamed is a sign of internal damage and the article could become a flame thrower after flame thrower. Place the charged battery on non-flammable pad, or place it in Li-Pol Safe Bag. Near must be free of flammable objects or liquids. The manufacturer recommends storing batteries charged at about 70% of the capacity.
Warning: Due to the size and fittings of this Li-Pol battery, it isn't necessary to modify the AEP gun. Therefore, when buying a weapon, it isn't necessary to add a pre-sales service of Service - Li-Pol installation to the AEP in the shopping cart, this is only for installing AEP Rhino Li-Pol 7.4V/360 mAh battery. The white service connector is used to charge the battery. To charge this Li-Pol battery, you can't use the base packet charger that some manufacturers put into the gun pack, as it is only for NiCd and NiMH batteries. A suitable charger and other recommended products can be found on the Accessories see above.
Recommended airsoft accessories, parameters, review and other useful information about the product Battery, AEP, Li-Pol, 7.4V, 550mAh, 20C, StormPower can be found in the bookmarks.
Lithium polymer (Li-Pol) accumulators represent the most modern energy source. They excel especially with low weight (30g) and excellent discharging characteristics. Because of a completely different type of electrochemical reaction, ongoing inside the cells require a completely different treatment than conventional NiCd or NiMH accumulators.
Thanks to its parameters and small dimensions, it replaces obsolete NiCd and NiMH accumulators in electric guns - AEP. With this battery, you'll get better cadence for the gun, faster trigger response, and a larger number of shots.
The nominal voltage of the Li-Pol cell is 3.7V (as opposed to 1.2V for NiCd and NiMH batteries). In operation, cell voltage must not exceed 4.2V when charging and falls below 3V. Exceeding these values means that the battery is irreversibly damaged. In normal operation, the no-load voltage (before charging the battery) shouldn't drop below 3.5V. If you find lower voltages before charging, you discharge the batteries excessively.
Becouse of that you need to use for charging by special charger for Li-Pol batteries. It is also recommended to use a special Li-Pol alarm circuit that alerts you to a critical discharge of the battery.BR>
Protect cells from mechanical damage - trance electrodes puncture. This could result in an internal short circuit with explosion and fire. Don't pierce "inflated" cells - inflamed is a sign of internal damage and the article could become a flame thrower after flame thrower. Place the charged battery on non-flammable pad, or place it in Li-Pol Safe Bag. Near must be free of flammable objects or liquids. The manufacturer recommends storing batteries charged at about 70% of the capacity.
Warning: Due to the size and fittings of this Li-Pol battery, it isn't necessary to modify the AEP gun. Therefore, when buying a weapon, it isn't necessary to add a pre-sales service of Service - Li-Pol installation to the AEP in the shopping cart, this is only for installing AEP Rhino Li-Pol 7.4V/360 mAh battery. The white service connector is used to charge the battery. To charge this Li-Pol battery, you can't use the base packet charger that some manufacturers put into the gun pack, as it is only for NiCd and NiMH batteries. A suitable charger and other recommended products can be found on the Accessories see above.
Recommended airsoft accessories, parameters, review and other useful information about the product Battery, AEP, Li-Pol, 7.4V, 550mAh, 20C, StormPower can be found in the bookmarks.
Excellent replacement for the underperforming 500 mAH NimH original battery for the TM Glock 18C and the Cyma Cm030. No need for a mosfet with this Lipo! Excellent product
Power my Glock 18C AEP.
Impressive, these make my TM USP (also from this Shop) shoot as fast as a GBB, no delay anymore!
Very good product. Very fast delivery. I use for Glock 18C AEP Tokyo Marui.